Close Out
Lumatek Digital Ballast
From HydroFarm
These will fit HydroFarm sockets and cord-sets
Brightest Ballast on the Market
• More Lumens - 10-20% more than Magnetic ballasts
• Lumatek ballasts are 8-15% Brighter than other brands
• 3 year full Warranty, Plus 2 years prorated
• Small compact Desigh
• Completely Sealed
• Fast Start Up - reaches full brightness in under a minute
• Cut-Off Circuitry
• RF Shielded
• Completely Silent
• Microprocessor Controlled
The Lumatek Ballast is the brightest ballast in the industry. Light meter readings indicate that the Lumatek ballast is up to 27% brighter than common core and coil magnetic ballasts. The Lumatek is 10-15% brighter than other brands of digital ballast on the market.
Over time, core and coil ballasts will degrade, become louder, use more electricity, and produce more heat, while the lumen output declines. Digital ballasts maintain lumen output and efficiency over the life of the unit. The output of magnetic ballasts degrades over time and can fluctuate by up to 10% during a 12 hour cycle. Digital ballasts produce a constant output without any fluctuation.
Magnetic ballasts waste up to 75 watts to convert the electricity, whereas Lumatek sends the FULL 600 watts to the bulb, lighting it to its fullest potential. The Lumatek achieves superior light meter readings in comparison with other digital ballasts on the market through using microprocessors to detect the precise type of lamp used and accordingly supply the correct power. Some lamps are able to use slightly more than 600 watts. The Lumatek ballast will detect this difference and increase output accordingly.
The Lumatek Ballast is the brightest in the industry. Light meter readings indicate the Lumatek is up to 27% brighter than common magnetic ballasts and 10 - 15% brighter than competing electronic ballasts. Over time, magnetic ballasts degrade, become louder, use more electricity, and produce more heat, while the lumen output declines. Digital ballasts do not degrade and maintain their lumen output and efficiency over the life of the unit.
The Lumatek is programmed for a 'soft-start' and does not require an initial surge of power to light the lamp. This increases the lamp life and allows the end user to start multiple ballasts at the same time without tripping breakers. To ensure safe operation, the Lumatek is programmed to automatically shut off in case of a short in wiring or a faulty or missing lamp.
The Lumatek uses a resin-sealed case for completely silent operation without a noisy fan. Each unit is burned in at the factory for twelve hours to ensure maximum reliability. The Lumatek comes with a 15ft. RF shielded output cord. Competing brands of digital ballasts not using shielded cords can disrupt radio or satellite signals for up to 50 yards. The same interference can also be experienced with pH monitoring equipment. The Lumatek ballast, if properly connected, will have minimal RF interference (less than 5 ft.) and will not interfere with pH monitoring equipment.
Why are there separate ballasts for 120v or 240v?
Lumatek ballasts are voltage specific and cannot be modified to change the input voltage. The 240v digital ballast is much more efficient, producing more light while generating less heat than its 120v counterpart. Other dual input voltage digital ballasts can never achieve the same efficiency as dedicated 240v versions.
Warranty Information
Lumatek offers the best warranty in the industry - 3 year replacement and 2 year pro-rated. Lumatek will replace any defective units with brand new units for 3 years from the date of purchase.
Comes without lamp socket
More Information
Lumatek Digital Ballast Technical Bulletin
5 YEAR WARRANTY More info...
Bulbs...
